AikyaNova Labs

ESP32 Health Monitor

Navigation

AikyaNova Labs © 2025

🔌

Device Hub

ESP32 hardware wiring diagrams, firmware flashing sketch, and live stream diagnostics.

🔌

Hardware Architecture

Reference firmware: AikyaNova Labs Embedded Systems. This dashboard reads whatever those sketches print over USB serial at 115200 baud.

PHYSICAL SENSOR (AD8232 / MAX30102)
   → ESP32 (acquisition + BPM/SpO₂ processing)
   → USB Serial @ 115200 baud
   → Browser (Web Serial API)
   → Parser → Validator → Sensor Store → Real-time Dashboard
💾

Ready to flash or monitor your ESP32?

View the full C++ Arduino sketch or inspect live packet stream telemetry.

🔴 MAX30102 → ESP32 Pin Mapping

MAX30102ESP32Notes
VIN3.3VPower supply
GNDGNDGround
SDAGPIO 21I²C data
SCLGPIO 22I²C clock

I²C runs at 400 kHz (I2C_SPEED_FAST) in the reference sketches. Raw values stream at roughly 50 Hz.

📈 AD8232 ECG → ESP32

The reference repository currently documents the MAX30102 wiring only; it does not publish an AD8232 pinout. Pin assignments are therefore not shown here to avoid inventing them — use the analog output pin and lead-off pins defined in your own AD8232 sketch, and make the firmware print the sample as ECG:<value> or as a CSV row so this dashboard can parse it.

📡 Serial Formats Supported

Max3010x_Raw_Values.ino   IR=52341	RED=48213
Max3010x_BPM.ino          Signal:120, Threshold:80, BeatMarker:0
Max3010x_SpO2.ino         IR_Signal:120, Threshold:80, Beat:0, BPM:38, SpO2:49
JSON                      {"timestamp":123456,"ecg":2048,"ppgIR":52341,"ppgRed":48213,"bpm":76,"spo2":98}
CSV                       123456,2048,52341,48213,76,98

The SpO₂ sketch prints BPM and SpO₂ divided by 2 for the Arduino Serial Plotter. The parser multiplies them back by 2; adjust in Settings if your firmware prints true values.

Device connection wizard

  1. STEP 1Choose USB SerialDONE
  2. STEP 2Connect ESP32WAITING
  3. STEP 3Detect incoming dataWAITING
  4. STEP 4Validate packetsWAITING
  5. STEP 5Detect ECGWAITING
  6. STEP 6Detect PPGWAITING
  7. STEP 7Start monitoringWAITING

Test hardware connection

A check only passes once real data of that kind has actually arrived from the ESP32.

  • ESP32WAITING
  • SerialWAITING
  • PacketsWAITING
  • ParsingWAITING
  • ECGWAITING
  • PPG IRWAITING
  • PPG REDWAITING
  • BPMWAITING
  • SpO2WAITING
  • LM35 tempWAITING
  • BMI323 IMUWAITING

Research & monitoring use only. Sensor measurements may require calibration and clinical validation and should not be used as a substitute for professional medical diagnosis or treatment.